Light Weight Mems Imu Inertial Measurement Unit 400deg/s for Automotive Industry
Production Description
The MEMS inertial measurement unit consists of a three-axis gyroscope, a three-axis acceleration meter, a three-axis inclination angle, a temperature sensor, a signal processing board, a structure and necessary software, and is used for measuring three-axis angular rate, three-axis acceleration and three-axis inclination angle of a carrier. And output that gyro, the loading table and the inclination data aft error compensation (including temperature compensation, installation misalignment angle compensation, nonlinear compensation and the like) through an RS-422 serial port according to an agreed communication protocol.
Main Parameters
Gyroscope specifications
| Parameter | Unit | IMU6-1 | IMU6-1A |
| Measuring range (customizable) | °/s | ±400 | ±400 |
| Zero bias stability (@ Allan Variance) |
°/h | 1 | 0.5 |
| Zero bias stability (1s smooth, 1σ, room temperature) |
°/h | 10 | 5 |
| Zero bias stability (10s smooth, 1σ, room temperature) |
°/h | 5 | 1 |
| Zero-bias error over full temperature range | °/h | 20 | 10 |
| Random walk | °/√h | 0.2 | 0.1 |
| Zero-bias repeatability | °/h | 10 | 5 |
| Zero bias acceleration sensitivity | °/h/g | 1 | 1 |
| Resolution | °/h | 2 | 1 |
| Scale factor nonlinearity | ppm | 500 | |
| Scale factor repeatability | ppm | 500 | |
| Cross coupling | % | 0.1 | |
| Bandwidth | Hz | 125 | |
Acc Specifications
| Parameter | Unit | IMU6-1y-1 | IMU6-1y-2 |
| Measuring range (customizable) | g | ±10 | ±30 |
| Zero-bias stability (Allan Variance @ 25 ºC) | mg | 0.02 | 0.05 |
| Zero-bias stability (1s smoothing) | mg | 0.1 | 0.5 |
| Zero-bias stability (10 s smoothing) | mg | 0.05 | 0.2 |
| Zero-bias error over full temperature range | mg | 1 | 3 |
| Random walk | m/s/√h | 0.001 | 0.002 |
| Zero-bias repeatability | mg | 0.1 | 0.5 |
| Scale factor repeatability | ppm | 500 | |
| Scale factor nonlinearity | ppm | 500 | |
| Bandwidth | Hz | 125 | |
Size
Main Application Fields
